Газовый радиационный нагреватель Radium U 30

промышленный

Daygas combines efficient, economical, high-quality, and functional products that place great emphasis on innovation, research, and development, thereby saving energy in the heating sector for end users.Short start-up time.Frost protection.Low emissions.Low energy consumption.High safety level.Easy maintenance and assembly.Safe gas valve system.Available in two types: Type I and Type U.Heat-resistant, fireproof cable.Radiant heating without air circulation.Step display and error notification on the display screen.Possibility of operation in 2 stages with remote control or with a thermostat.Power30 kWGas consumptionNG 2.85 m³/h / LPG 2.11 kg/hDimensions250h / 7200-10200L / 405wWeightNet 120-175 kg / Gross 150-220 kgOperating pressure21-55 mbar NG / 32-55 mbar LPGSuspension height260-470 cmElectrical connection230-240VAC 50-60Hz +/-15%Gas connectionG ¾''Product Features:Thermal processing in radiant tube heaters uses aluminized steel radiant tubes.From raw material to finished tube, the production process undergoes special treatments for high brightness.Our radiant tubes are characterized by high operational performance. These tubes are aluminized and made from calorimetric steel rolls.End users with aluminized tubes achieve higher efficiency even at low power. We provide effective heating.Radium Tube Radiant Heaters:Daygas Radium tube heaters are modern devices designed for heating high ceilings and large volumes. Radium heats the atmosphere by reflecting thermal energy generated by the combustion of a gas-air mixture inside the radiant tubes, directing it to the desired environment thanks to parabolic aluminum reflectors. Radium tube radiators heat people and objects, ensuring optimal comfort for heating.Reflectors of Radium Radiant Heaters:The radiation rays emitted from the tube surface area are colored red (solid line), while the rays reflected from the reflector are marked in orange (dashed line). Usually, radiation leaves part of its energy on each surface it encounters. The choice of reflector material is important. It is desirable to reflect the radiation as it is, without energy loss. Therefore, our products use aluminum reflectors with high reflectivity.Control Elements:Remote control.Integration via control board.Pako manual switch.Automatic control with thermostat switching.Integration into automation systems (SCADA control).Control Panel Features:Password protection.Heat saving mode.Computer communication port.Graphic LCD screen 128 x 64.Frost protection function.Programmable 24/7 function.Automatic and manual control capability.External temperature sensor connection possible.Control of up to 8 independent zones and 32 devices in total.Analog Room Thermostat:The Daygas analog room thermostat turns off when the set temperature is reached, automatically switching off the device. When the ambient temperature drops below the set value, the device automatically turns on again at maximum level, thus saving fuel.Temperature Sensor:Frost protection mode.Smooth control capability.Temperature adjustment via the device.When your devices approach the temperature you programmed with the Daygas temperature sensor, it ensures fuel savings by reducing the modulation value of the device depending on weather conditions. When the ambient temperature reaches the desired value, the device automatically turns off, and when the temperature drops below the desired value, it automatically sets the most suitable temperature for the environment and resumes operation.Manual Control with Pako Switch:Stepwise manual control via Pako switch can be provided. Where there is no remote control or it is not needed and more local control is required, the device can be controlled at the required level using the Pako switch.Remote Control:Daygas remote controls have 3 buttons and simple functions. These control devices offer easy use. With the Daygas remote control, all device functions such as on/off, heat up/down, and reset can be easily controlled. All Daygas products can be controlled remotely with a single remote.Integration into Automation System (SCADA):Our devices can be directly connected to building automation systems (BMS) with Modbus communication protocol via RS485 port (internal). It can be integrated, or if there is no available BMS, device control via HMI touch panel or PC can be performed locally. It can be used fully automatically from the center.In the BMS system:Device operation schedule for specified days and hours.Operation of heaters with regional or individual step and modulation control.Viewing fault codes from devices in the system and identifying which device has a problem, saving them in memory.Functional control elements such as instant, daily, weekly, or monthly fuel consumption monitoring.Technical Specifications:Power: 30 kWGas consumption: NG 2.85 m³/h / LPG 2.11 kg/hDimensions: 250h / 7200-10200L / 405wWeight: Net 120-175 kg / Gross 150-220 kgOperating pressure: 21-55 mbar NG / 32-55 mbar LPGSuspension height: 260-470 cmElectrical connection: 230-240VAC 50-60Hz +/-15%Gas connection: G ¾''